Model Number: PS-SP450PN
Brand Name: Sparkle
Key Specifications/Special Features:
Mfr part number: ATX-450PN-B204Features:Complied with ATX12V standardHigh efficiency and reliability, low noise and rippleCompatible with European union directive 2002/95/EC (restriction on hazardous substances)Remote on/off function
Internal 12V DC fan included
Noise killer (thermal fan speed control function)
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 sub part J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB report)
Total power: 450W
Type: ATX from factor 12V v2.2
Input:
Output:
Dielectric withstand: primary frame ground 1800V AC for 1 second
Efficiency: 70% minimum measured at normal AC mains voltage and frequency with full load
Rise time: less than 20ms
Hold-up time: 12ms minimum at nominal input voltage
Power good signal: power on delay time 100 - 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage current: less than 3.5mA at 115V AC/60Hz
MTBF: 100,000 hours
Connectors: 1x 20+4pin main connector, 1x 4pin 12V CPU connector, 1x PCI-Express connectors, 2x SATA connectors, 6x peripheral connectors, 1x floppy connector
Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inches/150.0 x 140.0 x 86.0mm
- Input range: ±10% of 115Vrms/57-63Hz or 230Vrms/47-53Hz, manual selection
- Input current: 10A (RMS) at 115V AC, 5A (RMS) at 230V AC
- Inrush current: no damage
- +3.3V at 22A, +5V at 15A, +12V1 and +12V2 at 18A, -12V at 0.3A, +5VSB at 2.5A
- +3.3V and +5V total output not exceed 145W
- +12V1 and +12V2 total output not exceed 360W
- +3.3V and +5V and +12V1 and +12V2 total output not exceed 433W
Main Export Markets:
- Asia
- Australasia
- Central/South America
- North America
- Western Europe